Page 45
【
Resolution
】
set display resolution.
【
Channel
】
Choose the set code output channel number.
【
Region Cover
】
means the selective state. Click the cover area button and enter the corresponding
channel window. You can cover the arbitrary using mouse. (Black region is for output)
【
Time display
】
and
【
Channel Title
】
3.5.6 PTZ setup
Picture 4.29 PTZ setup
【
Channel
】
Choose the dome camera input channel.
【
Protocol
】
Choose the corresponding dome protocol. (PELCOD as an example)
【
Address
】
Set as the corresponding dome address. Default: 1.
（
Note
：
The address must be
consistent with the dome address.
）
【
Baudrate
】
Choose the corresponding dome baud rate length. You can control the PTZ and vidicion.
Default: 115200.
【
Data bits
】
Include 5-8 options. Default: 8.
【
Stop bits
】
Include 2 options. Default: 1.
【
Parity
】
Include odd check, even check, sign check, blank check. Default: void.
3.5.7 Tour setup
Set the patrol display.
means that the tour mode is turned on. You can choose the single window,
