EN
2
User manual
INTRODUCTION
PNI TV801 DVB-T2 antenna was designed to receive digital terrestrial TV channels. Can be used with any TV
set equipped with DVB-T, DVB-T2 or DVB-T DVB-T tuner (STB) which allow power by coaxial cable.
If you have a TV (plasma, LCD or LED) without a built-in DVB-T2 tuner, you can use this antenna along with the
PNI TV901 DVB-T2 Digital Tuner
for receiving terrestrial TV channels from the national TV digital broadcast
service.
TECHNICAL DATA
Frequency range
87.5 - 230MHz
470 - 862MHz
Frequency bands
VHF / UHF / FM
Gain
max. 30dB
Output level
100dBµV
Impedance
75Ω
Noise
≤3dB
Power supply
Through AC / DC power adapter (DC 6V/100mA)
or through the DTV set-top box (DC 5V/40mA)
Maximum distance from TV relay
~ 40 km (without obstacles)
Anti-interference filter
3G / 4G / 5G / LTE
Supported resolutions
HD, full HD, 4K Ultra HD
MAIN FEATURES
•
SMD Circuit Technology
•
Shilded for minimum interference
•
Buil-in in high gain and low noise amplifier
•
Power supply via 230V adapter or DTV set-top box tuner
•
Supported digital TV terrestrial signal: DVB-T, DVB-T2, ISDB-T, DMB-T / H, ATSC
•
Supported digital radio / audio signal: DAB
•
Compatible with HD, full HD, 4K
•
3G / 4G / 5G / LTE filter
INSTALATION
Notes:
•
For an optimal reception, place the antenna away from sources of interference such as: air conditioners,
hair dryer, microwave oven etc.
•
If possible, position the antenna near the window facing the broadcast relay to ensure the reception of
the best signal
•
Ensure that there are no obstacles between the antenna and the broadcast relay (walls, blocks, high
buildings, hills, mountains) that can interfere with the reception of the signal.
Install and power the antenna via the 230V adapter
1.
Connect the coaxial antenna cable to the DTV tuner or directly to the TV (if it has a built-in tuner)
2.
Connect the DTV set-top box tuner to the TV
3.
Plug the antenna into the socket using the adapter included in the package
4.
Change the direction of the antenna until you get the best reception.
