PNI Hunting 3C / 300C, User Manual

Page: 27 / 86

EN
27
Frequency
50HZ, 60HZ; improper setting may cause camera screen flicker;
Incorrect frequency setting may cause the screen to flicker, depending on the environment.
SD Cycle
Select “ON”, press “OK”, camera will continue to record photos/videos by deleting earliest photos or
video clips
Reset Select “Yes” to reset camera back to factory default settings.
Password
Select “ON”, press “OK”, to enable password protection for your camera; support totally 6 digits/
alphabets long password access.
About Firmware version (Version: / IMEI: / MCU:)
TECHNICAL SPECIFICATIONS
Image Sensor 5 Mega Pixels Color CMOS
Resolution 2560x1920
Day / Night Mode Yes
IR range 20m
IR LEDs Top: 25 LED, Foot: 31LED
Memory Slot de card SD (max 32 GB)
Operating keys 10
Lenses F=3.0; FOV=100°; Auto IR-Cut-Remove (at night)
LCD screen 2” TFT, RGB, 262k
Motion sensor sensitivity 3 levels
Motion detection distance 20m
Motion detection angle 110°
Photo resolutions 5MP/8MP/12MP = 2592x1944/3264x2448/4032x3024
Photo format JPEG
Video resolution 1080P (1920x1080): 15FPS, 720P (1280x720), 640x480
Video format AVI
Video recording time 5-60sec. programable
Successive photos 1-5
Shoot 0.35~0.45s
Trigger interval 4s-7s
Loop recording Yes
Power supply Batteries: 8 buc AA/R6; External: adaptor 12V
Battery type Alkaline or Li-Ion or NiMH batteries
Loop recording Yes
Power supply Batteries: 12V; Power adaptor DC: 12V
Battery type 8AA R6
External DC 12V
Consumption in stand-by 0.173mA
Stand-by time 4~6 months (4×AA~8×AA)
Auto Power Off
In Test mode, the camera will automatically shut down in
60 seconds if you do not touch any key.