10
1. Insert the lithium battery correctly as the correct polarity facing up.
2. Close the battery compartment.
Note: Please uninstall your battery when you don't use your camera for a long time.
Charging your lithium battery
To charge your battery, you only need to connect your camera to PC or 220V adapter with
supplied USB cable correctly. The LED light will light up and it will be off after full charge.
Install a SD memory card
This camera supports any compatible SD memory card up to 32GB.
Locate the SD memory card slot, insert a card as above, until you hear a “Click” sound, it
indicates your SD card is installed with an icon “SD” appear on the LCD screen.
Starting your digital Camera
Your digital camera is included 3 modes: Camera mode, Video mode and Playback
mode.
Power on
Press Power button once to turn on your camera. The LCD will light up and it will sound
“beep”, this indicates your camera is turned on and ready for use.
Power off
Press Power button once to turn off your camera. When there is insufficient battery
power, your camera will show “Low Battery” on the LCD screen and power off
automatically after a moment.
Photo mode
After you power on your camera, icon will appear on your LCD screen, indicating your
camera is in Camera Mode.
Taking Photos
You can compose your shot using LCD screen. Hold the camera steady and press
Shutter button to take photo. There will be a short delay while the camera saves the photo
to memory. After each photo is shot (when the camera returns to icon mode) the numbers
of photos left to shoot at this resolution will be displayed on the LCD screen.
EN
