PNI ELF1000S, User Manual, Page: 3 / 5

3
Recharging mode:
Connecting the DC adaptor with the proper AC power supply
Connecting the other side of the DC adaptor to the recharging cradle
DC jet.
When putting the Elf night light onto the recharging cradle, there may
be three occasions.
A blue LED showing on the Elf night light body indicates the bad
contact between the recharging cradle and the Elf night light.
The blue and red LEDs keep flashing alternatively indicates the Elf
night light is being recharged properly.
A red LED on the Elf night light indicates the completion of the
recharging process.
Caution:
If the 5V DC adaptor is not connected with the power supply, the LEDs
will not be on.
Users are advised to recharge the Elf night light after first purchase