PNI CT36, User Manual

Page: 13 / 78

EN
13
of the week are fixed from Monday to Sunday (1 ~ 7), each day has 4 time periods (1 ~ 4). Each press of the
P button can be performed in the next setting.
1). Press P and hold for 3 seconds, the “hour” display flashes, change the value with the + and - buttons.
2) Press the P button, the temperature blinks, change the desired temperature with the + and - buttons.
3). Press the P button for the next time.
4). Repeat the settings for the other days and periods similarly.
Period 1 2 3 4
Hour Temp Hour Temp Hour Temp Hour Temp
12345 (Mon-Fri) 7:00 22
°
C 8:30 19
°
C 17:00 22
°
C 22:00 19
°
C
6 (Sat.) 8:00 22
°
C 8:30 22
°
C 17:00 22
°
C 22:00 19
°
C
7 (Sun.) 8:00 22
°
C 8:30 22
°
C 17:00 22
°
C 22:00 19
°
C
ADVANCED PARAMETER SETTINGS
Turn the thermostat screen Off by pressing the On / Off button. With screen Off, press and hold in the
same time and buttond for parameters settings. Pres M to navigate and arrows to change value.
Press ON/OFF button to exit menu.
MENU Description Range Defalt value
01 Temp. calibration for internal sensor -8
°
C ~ 8
°
C (0.5
°
C step) 0
°
C
02 Set Point Max. 5
°
C ~ 35
°
C 35
°
C
03 Set Point Min. 5
°
C ~ 35
°
C 5
°
C
05 Frost Protection Temp. 5
°
C ~ 15
°
C 5
°
C
09 Histerezis ( Deadzone - 0.1
°
C step) 0.2
°
C ~ 6
°
C 0
°
C(Off)
11 Child lock function 1: ON 0: Off 0
12 Open window detect function-OWD On Off 0
13 OWD - Detect time 2 ~ 30 minutes 15 minutes
14 OWD - Drop temp. select ( within
detect time)
2,3,4
°
C 2
°
C
15 OWD - Delay time select
(Return to previous working status)
10 ~ 60 minutes 30 minutes
17 Factory reset 0 : No 0
1: Yes, and then press
On/off button for 5s,wait
until thermostat restart.
Software Version 5055-02
RECEIVER WIRING DIAGRAM
The operation of connecting the receiver unit with 230 V power supply and central heating system must be
performed only by qualified personnel and only after consulting the thermostat and boiler documentation.
The receiver unit has a relay command (NO and NC / Normal Open and Normal Closed) without potential
(non-energized/dry contact) which executes the closing of a control circuit with a maximum current of 10 A,
and a maximum voltage of 250 V AC / DC. Find examples of connection with certain models of boilers at the
end of the manual.