User manual - 3
Safety warnings
Read the warnings below carefully before putting the device into
operation.
• Keep the device in a clean and well-ventilated environment,
at least 100 mm away from the wall or other objects. During
operation, the surface temperature of the device could
reach 50°C.
• Do not open the device housing to avoid the risk of short
circuit.
• Do not spill liquid on the device. Risk of short circuit.
• Do not store or use the device in the following conditions: in
spaces with flammable or corrosive gases, in spaces with a lot
of dust, in spaces where the temperature e 40°C or
drops below -10°C and the humidity exceeds 90%, under
sunight or near heat sources.
• Do not allow children to get close the voltage stabilizer.
• The stabilizer must be supplied from a grounded source.
• In case of fire, do not use water but only fire extinguishers.
• Do not connect consumers with loads that exceed the power
of the stabilizer. For example, motor/compressor electronics
can start 2-6 times more than the declared power. Choose
the stabilizer, taking this into account.
• In the nominal voltage range ± 25% 50/60Hz, the stabilizer
offers 100% power on the output. Outside this range, the
output power should be according to the diagram below:
