insert the cupola shaft
through the hole in the
cupola hub
bolt the cupola shaft
to the cupola hub
Each of the tubular frame supports consist of two parts.
For each support connect these two parts together
until the “snap button” snaps into place.
Place the cupola hub with the cupola shaft assembled
to it in the centre opening of the top (the long part of
the shaft on top and the shorter part of the shaft on
the bottom). Insert the end of each of the tubular
supports into the housings on the cupola hub.
To prevent the top from becoming dirty when installing it,
place the tarp supplied on the ground and spread the top
onto the tarp with the seams (sleeves) of the top facing
upwards. Insert the frame support into the sleeve completely.
Each support must be inserted with the “curve” of the
support facing the same direction.
Place the cupola fabric supplied over the long
shaft and attach to loops on the sleeves of the
top. If applicable place a flag on the cupola shaft.
Instruction Manual / Manuel d’instructions
Super Dome
pnh.ca
Large Format Printing
Event Marketing Products
Retail & Exhibit Solutions
