Pneumatech PH 230 HE, Instruction Book

Page: 27 / 66

Topic Description
Week Action Schemes
Displays 4 programmable week action schemes.
Each week action scheme contains 7 programmable days and these days can
contain a number of successive events on selected time slots.
Week Cycle
Contains 10 weeks and each week can be selected as 1 of the 4 week action
schemes.
Status Displays the status (On/Off) of the week timer functionality.
Remaining Running Time
Allows to set a timer to keep the compressor running for 1-240 minutes.
INFORMATION
Topic Description
www.xxxxxxxx.com
Refers to the company website where more detailed info on the product can be
found.
More The More button displays the software versions, addresses, licenses, ...
TEST
Topic Description
Output Test Allows a functionality check of the output.
Depressurize Vessels Allows a functionality check of the depressurization of the vessels.
COUNTERS
Topic Description
Running Hours Dryers Displays the number of hours the dryer has been running.
Loaded Hours Dryers Displays the number of hours the dryer has been running in loaded mode.
Standby Time Displays the number of hours the dryer is in stand by.
Actual State time Displays the number of hours the dryer is in current state.
Programmed State Time Displays the number of hours the dryer will be in current state.
Actual Halve Cycle Time Displays the number of hours the dryer is in halve cycle state.
Programmed Halve Cycle
Time
Displays the number of hours the dryer will be in halve cycle state.
Regeneration Cycles Vessel
A
Displays the number of regeneration cycles of vessel A.
Regeneration Cycles Vessel
B
Displays the number of regeneration cycles of vessel B.
Energy Saving PDP Sensor Displays the energy saving percentage with the PDP sensor.
Module Hours Displays the number of hours the module has been powered.
REGULATION
Instruction book
2920 1891 00 25