PMV Mounts PMVMOUNT1PA Mounting Instructions Download Page 4

Page: 4 / 4

Adjust the projector

Rotation:

Rotate the projector via the projector mount, the retaining bolt within the ceiling mount is torqued to stay tight but allow

manual rotational adjustment.

Tilt:

Adjusted via the tilt locking mechanism between the pole section and projector mount. Loosen retaining bolt and

tighten at desired angle.

Yaw:

Fine adjusted via the projector mount. Unlock the yaw adjustment with the locking fly nut.

Adjust yaw with thumb wheel, lock position again with locking fly nut.

Locking fly nut

Thumb wheel

Tilt locking mechanism

Summary of Contents for PMVMOUNT1PA

Page 1: ...ns carefully before installing your equipment Install the mount in a suitable location using fixings which are appropriate for the ceiling material and structure Consult a qualified builder if you re...

Page 2: ...ojector mount 2 Bx4 Cx4 Ex4 Fx4 or Attach projector mount and struts to all threads 3 Note Use the appropriately sized fixings from the fixing kit Use spacers as required not always necessary Alternat...

Page 3: ...m bolt Note This is the tilt adjustment mechanism Attach projector mount to pole section 4A Remove both tilt and tilt lock washers and large M8 x 75mm bolt from bottom of the Pole adapter Position the...

Page 4: ...nal adjustment Tilt Adjusted via the tilt locking mechanism between the pole section and projector mount Loosen retaining bolt and tighten at desired angle Yaw Fine adjusted via the projector mount Un...