background image

515 58th Ave SE, Calgary, Alberta, T2H 0P7
1-888-869-7652 | [email protected]

WWW.PRECISIONMOUNTS.COM

GENERAL INSTRUCTIONS

SAFETY:

Safety is dependent on the proper installation and servicing of this docking station. It is important to read and 
follow all instructions before installing this product.

Proper installation requires a good understanding of automotive electrical systems and is recommended to be 
performed by qualified technicians only.

There are no adjustments or user serviceable parts within the docking station. Opening the docking station will void 
the product warranty

Do not install equipment or route wires in the deployment path of any air bag, or where it may interfere with critical 
safety or operating controls of any vehicle.

POWER:

The power input should be 

15.0Vdc / 5.5 A.  

The dock is meant to operate on 14.5 Vdc to 16 Vdc. Use a 

recommended power supply for the dock. Panasonic recommends using a Lind Auto Adapter (PMT part#: PS002) 
for this dock.

WIRING:

PMT does not recommend relying on a cigarette socket adaptor for powering vehicle docks. We recommend hard 
wiring the power adapter using a good clean ground direct from the vehicle battery neg(-) post, and pos(+) supply 
from a fused 12vdc location also directly from the vehicle battery. All peripherals connecting to the docking station 
requiring external power should get power and ground from the same location as the dock.

Visi

www.precisionmounts.com/support/installation-user-guides.html

for a copy of our general wiring and  

troubleshooting guide.

Proper Use and Care:

Proper care and use of this product is critical to maximize safety and to prevent damage to the docking station and 
tablet.

Do not store, place, or drag any object on top of the docking station.

Visually inspect the docking station and tablet for any defect before using the dock or docking the laptop. Do not 
use if damaged.

Do not attempt to dock a computer or dock with wet contacts

Environmental:

Storage:  -51°C to 71°C (-59°F to 160°F)

Operating:  -29°C to 60°C (-20°F to 140°F)

SERVICING [ENTRETIEN]:

If the dock does not work as intended, please contact PMT for troubleshooting or to schedule a service

. [Si le dock 

ne fonctionne pas comme prévu, contactez PMT pour le dépannage ou pour planifier un service.]

Servicing of the dock should be only done by authorized service center personnel. Unauthorized servicing of the 
dock will void its warranty.

[L'entretien du dock ne doit être effectué que par le personnel du centre de service 

autorisé. Un entretien non autorisé du dock annulera sa garantie.]

Product Mounting Disclaimer
Precision Mounting Technologies Ltd (PMT) are not liable under any theory of contract or tort law for any loss, damage, personal injury, 
special, incidental or consequential damages for personal injury or other damage of any nature arising directly or indirectly as a result of 
the improper installation or use of its products in vehicle or any other application. In order to safely install and use PMT products full 
consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brake lines, electrical, drive train or other systems),  air-
bags and other safety equipment is required. PMT specifically disclaims any responsibility for the improper use or installation of its 
products not consistent with original vehicle manufactures specifications and recommendations, PMT product instruction sheets, or 
workmanship standards as endorsed through PMT policies and EULA.

Summary of Contents for AS7.P201.100










Reviews: