Connection/Disconnection
AUTOMATIC CONNECTION:
After initial pairing is complete, the speakerphone will remember the
ID of the phone. Every time you power on the unit, the
speakerphone unit will automatically search for the Bluetooth
mobile phone used last time. The blue indicator is off and the red
indicator flashes. After the Bluetooth link is established, the blue
indicator is on and the red indicator is off.
*Note: The Bluetooth phone must be switched on and
Bluetooth must be enabled on it before the speakerphone is
switched on. Otherwise the speakerphone will not reconnect to
it.
MANUAL CONNECTION (from speakerphone)
When the speakerphone is in standby mode and isn't connected
with the Bluetooth mobile phone after pairing, you can click the
function button to make the Bluetooth speakerphone search for the
paired phone. At this point, the red indicator flashes and the blue
indicator is off. After the connection is established the blue indicator
is on and the red indicator is off.
MANUAL CONNECTION (from mobile phone)
With the speakerphone in standby mode and not connected with
your Bluetooth mobile phone after pairing, you can use your
phone’s Bluetooth menu to re-establish the Bluetooth link. Refer to
the Bluetooth section of the operating instructions for your phone for
further details.
CANCEL SEARCHING
While the speakerphone is searching for your Bluetooth mobile
phone you can click the function button to cancel searching and to
let the unit return to standby mode.
AUTOMATIC DISCONNECTION
If the power is turned off, the speakerphone will automatically
disconnect from the Bluetooth mobile phone.
MANUAL DISCONNECTION
With speakerphone in standby mode and connected with the mobile
phone, you can press the function button for more than 6 seconds
to disconnect the speakerphone and the Bluetooth mobile phone.
MAKING CALLS
Make calls using the keypad of your Bluetooth mobile phone.
During the call, the blue and red indicators of the speakerphone
light up.
ANSWERING CALLS
When the unit rings on an incoming call you can click the function
button to answer the call, or you can click the power button to reject
the call.
HANG UP CALLS
During the call, you can click the power button to hang up the call.
SWITCH CALL MODE
When a call is in hands free mode, you can press the function
button for more than 6 seconds to switch to mobile phone mode.
You can also switch from mobile phone mode to the speakerphone
through your phone’s menu.
ADJUST VOLUME
During a call you can click the volume button or press the volume
button for a long time to adjust the volume.
LAST NUMBER REDIAL
In standby mode you can click the "+" button and the system will
redial the last number you have dialed.
This following function only apply to Bluetooth phones that
have voice dialing capability.
VOICE NAMETAG
Add a voice nametag for the number to be voice dialed. Refer to
"voice control dialing" section in the user manual for your mobile
phone.
INITIATE VOICE CONTROLLED DIALING
At standby status and Bluetooth mobile phone is connected, click
the function button to initiate voice control dialing, a voice prompt
can be heard.
VOICE CONTROLLED DIALING
Speak the nametag for the number to be dialed. If the spoken
nametag matches a stored nametag, an outgoing call is placed to
the number with this nametag.
TROUBLESHOOTING
PROBLEM
CAUSE ANALYSIS
SOLUTION
Can't be
switched to
hands free mode
No Bluetooth link
established
Conduct pairing
operation. Then
establish connection
Fail to pair
Phone locks its
Bluetooth functions.
(Note: PIN Code is:
0000
Re-power up unit and
initiate paring operation
again or power phone
off then power it on to
scan again
Bluetooth link
can't be
established
automatically
Pairing information
in phone or
speakerphone is
cleared.
Try pairing again
When a call is
incoming, it is
answered in 6
seconds
Auto answer
function is set.
Turn off this function
When a call is
established no
voice is heard
Manual switching
of voice is needed
for some phones.
Use phone menu to
transfer voice to the
speakerphone
No voice from
phone and
hands free unit
Bluetooth function of
phone is not
working
Use phone menu to
transfer voice to the
speakerphone
Broken voice
Too loud
Decrease the volume
Pair fail
PIN error
Input pairing code
‘0000’
Supplied Accessories
The PMR Speakerphone is supplied with the following accessories:
•
UK mains travel charger
•
Car charger
•
Additional wired earphone
•
Clip for sun visor
•
Glass mounting sucker kit
IMPORTANT NOTE: Compatibility with mobile phones
Most makes and models of mobile phones with work well with this
unit. Your Mobile phone must support Bluetooth audio transmission.
Some of the functions described in this user guide may not work
correctly or be usable with certain makes and models of mobile
phone. Please read the operating instructions for your phone
carefully.
Safety and general information
This device conforms to FCC Part 15.
User should not change or modify this device in anyway. The
change or modification may cause the cancellation of user's right to
use this device and also invalidate the warranty. To avoid radio
interference to any authorized services, this device should be used
as supplied without any modifications.
This device conforms to Directive R&TTE of May 1995 of European
Community and is approved to bear CE label.
If no proper protection design or electromagnetic compatibility is
considered, almost all devices will be affected by electromagnetic
interference (EMI).
Don't put fingers, hands or other body parts too close to the swivel
microphone otherwise they could be trapped and hurt.
CUSTOMER SERVICE INFORMATION
For other PMR Bluetooth products or support, please contact us
PMR Technology Ltd Web: www.pmrtechnology.co.uk
Email: [email protected]
or
EskTech Ltd (Windigo European Support Centre)
Web: www.esktech.com/support
Email: [email protected]
or
your local supplier or representative
DISCLAIMER
Whilst every effort has been made to ensure that the information in this
manual is accurate and complete, no liability will be accepted for any errors
and/or omissions made. The manufacturer reserves the right to make
changes and improvements to the specifications and features of the hardware
and firmware of the products described in this document without prior notice.
Reproduction, transfer, distribution or storage of part or all of the contents in
this document in any form is prohibited without prior permission of the
manufacturer. All trademarks acknowledged.
Version: QSGPMRSPhVer14