For additional information about this or other PMI products, contact us.
Pigeon Mountain Industries, Inc.
PO Box 803
LaFayette, GA 30728
Toll Free:
888.764.1437
Phone:
706.764.1437
Fax:
800.952.3747 or 706.764.1531
Email:
Web:
www.pmirope.com
Equipment Inspection Log
Item:
Model #
Size:
Date
Use or Maintenance
Comments
Name
ADDITIONAL INFORMATION
REMOVAL FROM SERVICE
Remove the Belt from service and destroy if it does not
pass inspection or if there is any doubt about the safety
or serviceability of the Belt. If any of the following
conditions are true, the Belt must be discarded:
• If the Belt has sustained a signifi cant fall (ie: fall factor 1 or greater).
• If the load bearing components of the Belt are damaged in any way.
• If the stitching shows excessive wear, is cut, or is otherwise affected in a
way that might affect Belt function or performance.
• If buckles or attachment points do not function properly, or show signs of
excessive wear or damage that might affect Belt performance.
• If the Belt has been visibly damaged by heat, chemical or other hazardous
condition.
• If the Belt has been in use for 5 years, regardless of condition.
WARNING
Proper training is required before use. Read these user instructions
and retain them as a permanent record, and maintain a copy with
the Belt along with the product use and care record. A use and care
record should be established and maintained by the purchaser or
user of the Life Safety Belt according to their needs, and should
include records specifi c to the Belt. Specifi c information to note
would include date of purchase; date put into service; maintenance
and inspection records. Refer to this information before and after
each use. The user of this equipment assumes all responsibilities
associated with its use.
WARNING
• YOU COULD BE KILLED OR SERIOUSLY INJURED IF YOU DO NOT READ
AND UNDERSTAND THIS BOOKLET BEFORE USING PRODUCT.
• SPECIAL TRAINING AND KNOWLEDGE ARE REQUIRED TO USE THIS
PRODUCT.
• YOU MUST THOROUGHLY READ AND UNDERSTAND ALL
MANUFACTURERS INSTRUCTIONS BEFORE USE.
• USE AND INSPECT THIS PRODUCT ONLY IN ACCORDANCE WITH THE
MANUFACTURERS INSTRUCTIONS.
• YOU CAN CONTACT THE MANUFACTURER AT 706-764-1437 FOR
IMPORTANT SAFETY INFORMATION.