PMFoundations Clock Divider, Assembly Manual, Page: 1 / 12

Page 1 of 12
Clock Divider v1.0a – Assembly Guide
Thank you for purchasing this module! This is an average build with some precision integrated
circuits. Some of the pads are quite small and you will need a chisel tip or screwdriver tip soldering
iron and the skill to solder these tiny joints.
The module is designed and sized for Eurorack systems. You will need a 16-10 pin eurorack power
ribbon connector with – 12/0/+12 which is connected to a synth power supply.
Follow the parts lists, these instructions and the PCB silkscreen text to build the module.
The module consists of 1 PCB board and a front panel.
You must follow the order of assembly as described below since some components will be soldered
underneath other components.
NOTE: Build options