background image

 

 

 

 

WARRANTY 

Polyurethane  Machinery  Corporation 

(hereinafter  “PMC”)  provides  this 

LIMITED  WARRANTY

 

(hereinafter  “Warranty”)  to  the  original  purchaser  (hereinafter  “Customer”)  covering  this  equipment 
and the original PMC 

manufactured accessories delivered with the equipment (hereinafter “Product”) 

against  defects  in  material  or  workmanship  of  the  Produc

t (hereinafter  “Defect”  or “Defective”) for a 

period  of  one  (1)  year  from  the  date  of  first  purchase  as  shown  on  the  original  PMC  invoice 
(hereinafter “Warranty Period”). 
 

If  during  the  Warranty  Period  under  normal  use,  the  Product  is  suspected  by  Customer  to  be 
Defective  in  material  or  workmanship,  it  is  Customer’s  responsibility  to contact  PMC  and  return  the 
Product to PMC as directed by PMC, freight prepaid. If PMC determines that the Product is Defective 
and that such Defect is covered by this Warranty, PMC will credit Customer for the reasonable freight 
charges incurred by Customer in returning the Defective Product to PMC, and PMC (or its authorized 
agent) will, at PMC

’s option, repair or replace the Product, subject to the following:  

 

Original Invoice: The original invoice must  be kept  as proof of the date of first sale and the Product 
serial number. The Warranty does not cover any Product if the Original Invoice appears to have been 
modified  or  altered,  or  when  the  serial  number  on  the  Product  appears  to  have  been  altered  or 
defaced. 

Product  Maintenance: 

It  is  the  Customer’s responsibility  to maintain the  Product  properly.  See  your 

maintenance schedule and  owner’s  manual  for  details.  The Warranty  does not  cover  an  improperly 
maintained Product.  

Non-PMC Components and Accessories: Non-PMC manufactured components and accessories that 
are  used  in  the  operation  of  the  Product  are  not  covered  by  this  Warranty.  Such  components  and 
accessories  shall  be  subject  to  the  warranty  offered  to  the  Customer,  if  any,  by  the  original 
manufacturer of such component or accessory. 

Other Warranty Exclusions: The Warranty does not cover any Product that PMC determines has been 
damaged  or  fails  to  operate  properly  due  to  misuse,  negligence,  abuse,  carelessness,  neglect,  or 
accident. By way of example only, this includes: 

  Normal wear and tear. 

  Improper  or  unauthorized  installation,  repair,  alteration,  adjustment  or  modification  of  the 

product. 

  Use of heating devices, pumping equipment, dispensers, or other parts or accessories with the 

product that have not been approved or manufactured by PMC. 

  Failure to follow the operating instructions and recommendations provided by PMC. 

  Cosmetic damage.  

 

Fire, flood, “acts of God,” or other contingencies beyond the control of PMC. 

 

 

Summary of Contents for EL-51A-RTD












Reviews: