7
Step 11
: Fit diagonal braces
and toe board as shown.
Dismantling: - Reverse the steps of assembly.
Be sure to unlock the guardrail braces at the
end of the tower opposite the hatch platform
but leaving them in position. Then, return to
the seated position in the hatch platform before
unlocking the other ends and removing the
guardrail braces.
SINGLE WIDTH ERECTION STEP
Step 10
: Using 3T method, fit 4
horizontal braces as illustrated.
NOTE: Repeat Step 6 to 9 until
desired platform height is
achieved and then follow
step 10.
DISTRIBUTED BY:
PMB QUICK ACCESS SDN BHD. (516692-V)
Lot 1797,Jalan Balakong,Bukit Belimbing,
43300 Seri Kembangan,Selangor D.E.
Malaysia
Tel : +603-8961 8355
Fax : +603-8961 1904
Email : [email protected]
Website : www.qaccess-scaffolds.com
SINGLE WIDTH LADDER SIDE
PART DETAIL
Horizontal Brace
Single Width
4 Rung Ladder
Side
Single Width
2 Rung Ladder
Side
Single Width
4 Rung Normal
Side
Hatch Platform
Single Width
2 Rung Normal
Side
Stabilizer Bar
Toe Board
Castor
Diagonal Brace
Step 9
: Place hatch platform
and fit diagonal braces as
shown.
DOUBLE WIDTH LADDER SIDE
PART DETAIL
Horizontal Brace
Double Width
4 Rung Ladder
Side
Stabilizer Bar
Double Width
2 Rung Ladder
Side
Castor
Diagonal Brace
Double Width
4 Rung Normal
Side
Double Width
2 Rung Normal
Side
Hatch Platform
Fix Platform
Toe Board