PMA STB55, Operating Manual, Page: 36 / 47

36 STB55
Display Description (entered values are factory settings)
Security area
0000
Enter password
For safety area
! 0000 !
Change password
Please note
Input
Type K
>
Type J
Thermocouple 2x type J
Display
>with
without
Decimal place
0,0
°
C
Sensor correction
Entry of the password for the security level (0010 in condition as delivered)
After an incorrect password has been entered three times, the device
enters a safety timeout for 60 minutes. With the setting 0000 and active
password protection, a jump to the working level takes place.
Change the password
Change the value within the range 0000 … 9999
Attentione:
Write down the password. Resetting to 0010 can only take place in the factory
Input
Type J
Double-thermocouple Fe-CuNi
Type K Double-thermocouple NiCr-Ni
Type N Double-thermocouple NiCrSi-NiSi
Type S Double-thermocouple Pt10Rh-Pt
Decimal place (only for Pt100 input and double thermocouple type J)
without
no decimal place
with one decimal place
Measurement correction
Change of the value in the range -10°C (-10,0°C) … 10°C (10,0°C)