130519/A ControlPro | Short user manual
EN - 21
4.4 Language |
menu 5.1
During the
Installation Wizard the ControlPro/HMI interface language has been set.
In the menu Language, you can select or change the default language. Furthermore,
there is also a possibility to import other languages.
To select a language:
• Select the button Edit to open the list box. The Select language screen opens.
• Select one of the available languages from the list box.
•
Select OK to save your selection and return to the previous menu, the new language
settings are enabled immediately.
Fig. 4.15 Select language
4.4.1 Language import
To import a new language file, which is not available per default:
•
The language file needed, is a file with a .mo file extension.
•
Copy the language file to the root directory of an empty USB stick
9
.
• Connect the USB stick to the Panel
10
.
• The 5.1 Language window displays the message: USB status: connected.
9
Refer to section 6.5 for the USB stick requirements
10 The USB connector is located inside the Panel.
Future development is to connect the USB to the HMI.
• Select the button Import.
Fig. 4.16 Language import
An attention message appears:
Fig. 4.17 Attention message
When the language import is finished, the message Done appears.
• Remove the USB stick from the Panel.
•
Restart the ControlPro, to implement the new language settings to the HMI.
• Switch OFF and ON the ControlPro system via the Main Switch.
• Return to the menu 5.1 Language and select the new language from the list of
available languages, as described above (Fig. 4.15).
