0000112607/010420/A ControlGo
20
ANNEX
FILTER CLEANING
FILTER CLEANING
0 = Service Mode
1 = Normal Mode
Learning Mode
A
B
C
D
Learning Mode
activated
I
0
I
0
MDB
SCS (#2)
Flowchart: GENERAL
Learning Mode
Explanatory notes:
A Leave the Panel open.
B Push and hold the black
button. Turn the main
switch
on
at the same
time. Continue to hold the
button; the white LED
shows a “heartbeat”
blinking pattern (Learning
Mode is starting up).
C When the green and red
LEDs are
on
and the white
LED is blinking, release the
black button (Learning
Mode is initializing).
D Wait until the white LED is
on
. The Learning Mode is
activated now.
green
red
white
green
red
white
white
