0000112607/010420/A ControlGo
21
ANNEX
0 = Service Mode
1 = Normal Mode
FILTER CLEANING
≥
5 s
MDB
MDB ready
#
#
=
?
?
FILTER CLEANING
<5 s
MDB-BM/2
MDB-BM/4
1
2
3
9
10
11
?
A
C
D
E
F
B
Flowchart: MDB
Explanatory notes:
A
Count the number of flashes of the yellow LED in
one blinking cycle (min. 2, max. 64). Interval
between two blinking cycles: 5 seconds.
B
Make sure that the number of flashes corresponds
with the number of filter cartridges...
C
If NOT and the buzzer sounds, no filter cartridges
are detected at all. Push the black button during
≥5 seconds to suppress the buzzer.
D Make sure that all cables and connections to the
SlaveBoard(s) are correctly installed.
E Make sure that all DIP switches are correctly
addressed (refer to Fig. 4.12 and Fig. 4.13).
F Push the black button shortly to restart the
Learning Mode. Repeat step A and onwards.
yellow
green
red
white
