PLX
devices inc.
www.plxdevices.com
11
5
Troubleshooting
Resetting Luxor
If Luxor stops functioning properly, you may need to reset Luxor to regain functionality.
Reset Procedure
To reset the product:
1. With Luxor’s OLED on, press the decrease button [<], increase button [>], and mode button simultane-
ously. Th e following display should appear.
Problem Turning Your Luxor On
If you are unable to turn your Luxor on:
1. Charge your battery. Your Luxor may not turn on if the battery power is too low.
2. If your screen does not turn on when you plug it in to charge, remove the tail cap and check to make sure
the battery connector is completely clipped into place.
3. If you fi nd that the battery connector was connected, reset your Luxor (follow the “Reset Procedure”
above).
2. Continue holding the buttons (about 3 seconds) until the following screen is displayed.
3. Press the power button to restart your Luxor.
