2
For XPERT series
1. Remove the screws securing the cover of the device.
2. Remove the cover of the device.
3. Remove the screws securing the hard disk bracket (A) and take it out.
4. Connect the SATA data cable and the power cable labeled HDD2 to one hard disk.
5. Place this hard disk 2 at the bottom against the remaining hard disk bracket.
6. Put the hard disk bracket (A) back to its place and tighten the screws.
7. Connect the SATA data cable and the power cable labeled HDD1 to the other hard disk.
8. Place this hard disk 1 into the hard disk bracket.
9 Mount the two hard disks to the hard disk brackets using the provided screws.
10. Put the cover back on the device and then tighten the screws.
