22
Maintenance
Go to the “Setup” page and click on “System”, “Maintenance” tab to display the
Maintenance page. On the Maintenance page, you may update or restore the
firmware, backup and restore settings, reset or restart the NVR system or save the
system information for technical support.
Upgrade firmware
Upgrade the firmware:
Click on the “Browse” button to select the firmware file and then click on “Upgrade”
button to perform the task.
Backup settings
Backup the current settings:
Click on the “Backup” button to backup all the settings you have made in the NVR
system, and a window will pop up asking you to save the backup file. You may choose
a saving folder for the backup file.
Restore settings
Restore previous settings:
You may restore the NVR to previous settings by loading a saved backup file. (See
the above
section for more information on how to backup system
settings.)
1. Click on the “Browse” button to find the backup file you have saved.
2. Click the “Restore” button and the restoration will start automatically.
3. The system will restart after the restoration is complete.
