11. USB PORT—Connect a USB Disk, a USB keyboard or a USB mouse to the scanner. You may also
connect the scanner to another compatible Plustek flatbed scanner by the included USB cable.
12. ETHERNET PORT—Connects the scanner to a port on the Ethernet hub by the RJ45 cable.
13. POWER RECEPTOR—Connects the scanner to a standard AC power outlet by the included AC
adapter.
14. POWER OUTPUT (Rated: 24Vdc/1.5A)—Connects the scanner to another compatible Plustek
flatbed scanner by the included DC cable.
15. POWER SWITCH—Use this to turn the scanner ON or OFF.
Installing the driver & TWAIN
1. Power on the system and launch Windows operation system to install the driver.
2. Unzip the file after you get the installation driver from Plustek website. Open the driver folder and
double-click the
Setup
to start the installation. Select
Language
from the list then click
Next
.
2
Summary of Contents for EasyScan 400
Page 20: ...3 遵循螢幕上的指示 安裝系統所需的驅動程式 19 ...
Page 27: ...3 遵循屏幕上的指示 安装系统所需的驱动程序 26 ...
