√
If previous recording not to be erased, select NO.
√
If no data exist in the tool, above prompt is not displayed.
NOTE The code reader keeps one recording ONLY. If data from
previous testing is not cleared, information of current test can not
be stored.
NOTE Review stored data completely before erasing.
4.
Use the UP/DOWN key to select a control module where the
data may be retrieved when more than one module is detected.
√
To view information of another control unit, quit current test and
select another module.
√
If only one control module is equipped with the vehicle being
tested, the above screen is not displayed.
Diagnostics
Clear existing
recording and save
data from this test?
<YES>
NO
Control Module
Engine
A/T
EQP-103 User’s Manual
26
