⑥
3-Pin DMX IN
POWER IN
5-Pin DMX IN
DMX Output
DMX Input
3-Pin XLR
3-Pin XLR
DMX512 Out
DMX512 In
3-Pin XLR
3-Pin XLR
For installations where the DMX cable has to run a long distance or is in an electrically noisy
environment, such as in a discotheque, it is recommended to use a DMX terminator. This helps
in preventing corruption of the digital control signal by electrical noise. The DMX terminator is
simply an XLR plug with a 120 Ω resistor connected between pins 2 and 3,which is then
plugged into the output XLR socket of the last fixture in the chain. Please see illustrations
below.
2
1
3
1
2
3
1:Ground
2:Data(-)
3:Data(+)
COMMON
DMX+
DMX-
120
Ω
Pin2
Pin3
FRESLED-PL200
