ARKIWASH-PL018
Pixel Zone Control
ARKIWASH-PL018 User Manual Page 12
ARKIWASH-PL018
Master-Slave Configuration
FUNCTION :
Mode Setting Key
UP :
Parameter Settings Key.
parameters add
DOWN : Parameter Settings Key. parameters sub
ENTER : Data Save Key,
temperature display
Master-Slave Configuration:
This function will allows you to link units together to run in a Master-Slave set-up. In a Master-Slave
set up one unit will act as the controlling unit and the others will react to the controlling units built-in
programs. Any unit can act as a Master or as a Slave however, only one unit can be programmed to
act as the “Master.”
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the unit. Use standard XLR data cables
to link your units together. Remember that the Male XLR connector is the input and the Female
XLR connector is the ouput. The first unit in the chain (master) will use the female XLR connector
only. The last unit in the chain will use the male XLR connector only.
2.
Connect the first “Slave” unit to the “Master.”
