E-24
Power Cable Connections and Switching the Power On/Off
There is an order in which the power cable is connected and the power is switched on/off.
Operating
1
Connect the AC IN connector of the projector and the power outlet using the sup-
plied power cable.
The POWER indicator will light amber, the cooling fan will rotate at low speed, and the unit will enter
the standby mode.
PO
WER
AUTO
MENU
STA
TUS
POWER
SOURCE
QUICK
MENU
PC
AU
DIO
VIDE
O
STATUS POWER
Lit amber
To wall outlet
Firmly plug in all the way.
2
Switch on the projector power
Main unit operation:
Press and hold the POWER button for a while.
Remote control operation:
Press the POWER ON button.
ON
OFF
POWER
STATUS POWER
STATUS POWER
STATUS POWER
POWER
Flashes green
(Approximately 60
seconds)
Lit green
Power is on
The POWER indicator changes to a flashing green and lights steadily after about 60 seconds.
The projection screen brightens after about 40 seconds.
The projector is now capable of regular projection.
3
Switch on the power of the connected equipment
Note
When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so
that it may be reached easily.
Summary of Contents for V-1100
Page 72: ......
