SHOWER/DIVERTER MIXERS
WALL MOUNT MIXERS
M007
2
3
4
1
MIN
MAX
PLATTEN
BELAGE
SGRENZ
EN
N
AVVERTENZE
ADVICE
Hot
water
Cold
water
Cold
Hot
-
When installing the concealed part of the mixer, please observe the given centre-to-
wall distances shown on the drawing and printed on the mixer protecting cover.
-
Remove protecting cover and insert flange
-
Install handle following the 'handle installation' instructions on the page aside.
DIVERTER REPLACEMENT
-
Remove handle. Remove cover plate (1).
-
Push knob (2) against seat. Without releasing pressure, unscrew knob
-
Unscrew diverter (3) using a 19 mm spanner
-
We recommend to replace the entire diverter unit and not separate components
-
Install mixer body paying attention to the min/max wall lining distance given on the
sticker
-
Block spout (1) on the flange wall with screws (2).
-
Remove the protective cover.
-
Insert the flange with his spout, paying attention to the seals (3).
-
Tighten the screw (4) on the spout.
-
Install handle.
1
2
3
