Plum ZAB-14, Service And Assembly Manual

Page: 8 / 60

8
2. General information
ZAB-14 regulator is a device intended for
controlling operation of biomass boilers.
Supplied by one or three phases it controls
operation of two worms. It is equipped with
wiring and sensors.
ZAB-14 interior includes two execution
modules A and B of the ecoMAX800P2-I
series module, 10A C-type installation
overcurrent switch, motor switches and
relays. Outside (under the cover) there is a
control
panel for regulator modules,
emergency button, signalling LED and
installation switch.
ZAB-14 can be used within a household and
in slightly industrialized buildings. Moreover,
the regulator is intended to be enclosed on a
boiler or in its vicinity by the boiler
manufacturer.
3. Information about documentation
An integral part of ZAB-14 device is
operation and maintenance manual of
enclosed ecoMAX800P2-I regulator, A and B
module and STB temperature limiter manual.
We are not responsible for any damages
caused by failure to observe these
instructions.
4. Storage of documentation
This assembly and operation manual, as well
as any other applicable documentation,
should be stored diligently, so that it was
available at any time.
5. Applied symbols
In this manual the following graphic symbols
are used:
- useful information and tips,
- important information, failure to
observe these can cause damage of
property, threat for human and
household animal health and life
.
Caution: the symbols indicate important
information, in order to make the manual
more lucid. Yet, this does not exempt the
user from the obligation to comply with
requirements which are not marked with a
graphic symbol!
6. Directive WEEE 2002/96/EG
Act on electrical and electronic
equipment

Recycle the product and the
packaging at the end of the
operational
use period in an
appropriate manner.

Do not dispose of the product
together with normal waste.

Do not burn the product.