![Plum Ram E200 User Manual Download Page 8](http://html1.mh-extra.com/html/plum/ram-e200/ram-e200_user-manual_1568451008.webp)
3
Getting started
You need to insert the SIM card and charge the battery before using the
phone.
Battery use
To extend the battery life of your device:
1. Use the standard wall charger to charge the battery for the first time.
2. During the first 3-5 charge cycles, charge the battery until the battery
indicator on the display stops scrolling.
3. Avoid partial charging. Also, wait for the battery to discharge
completely before charging it again.
4. Charge the battery using the USB cable only if the recommended wall
charger isn’t readily available.
Installing the battery
1. Loosen the screw, hold the back cover and gently slide in upward
direction to open.
2. If the battery is in the compartment, lift and pull it out in the direction
of the arrow(shown below).