2
• 7 - eWebtel.com
PLUM Sp. z o.o.
Wspólna 19, Ignatki, 16-001 Kleosin, Poland
Technical Department
tel.: 85 749 70 08, fax.: 85 749 70 14, e-mail: [email protected]
installation manual
MacR6 N
• 5 - Connection with MacR6 N
• 6 - Configuration of parameters
1. Turn on the NFC on smartphone or tablet.
2. Start ConfIT - data loggers application, choose NFC communication and
close phone to the MacR6 N.
1. Take the smartphone or tablet off of the MacR6 N after the readout has
been generated.
2. Enter data into the watermeter- pulse factor, counter value, serial
number. Enter the PIN to the SIM card. By clicking ”More parameters”
you are able to set advanced values such as registration period, data
server address, or installation phone number.
1. Connect with MacR6 N.
2. Go to MOBILE CONNECTION tab using menu on the left side. Pick
COMMAND and choose INSTALLATION - SEND FULL REPORT.
3. Close the smartphone to MacR6 N to save configuration.
DEVICE IS CONFIGURED AND READY TO USE
There is no specific position for phone placement. It depends on location
of NFC antenna inside the smartphone.
3. Save the configuration. Tick the Save to device button and close
smartphone to MacR6 N.
4. Successful saving will be indicated by the message below.
When programmed - device will go to water meter recognition mode
what is indicated with proper message in main window.
Water meter detection is possible in few seconds when water flow is
present. When recognized app will show proper information.
When detection takes too much time please proceed with installation
once again.
ISSUE: MacR6 N_installation manual_EN_3.0.pdf
327.55
0.00