Plum Mobile RAM 10, User Manual, Page: 28 / 29

27
equipment and receiver.
—Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV
technician for help.
SAR tests are conducted using standard
operating positions accepted by the FCC with the
phone transmitting at its highest certified power
level in all tested frequency bands, although the
SAR is determined at the highest certified power
level, the actual SAR level of the phone while
operating can be well below the maximum value,
in general, the closer you are to a wireless base
station antenna, the lower the power output.
Before a new model phone is available for sale to
the public, it must be tested and certified to the
FCC that it does not exceed the exposure limit
established by the FCC, Tests for each phone are
performed in positions and locations (e.g. at the
ear and worn on the body)as required by the
FCC.
For body worn operation, this model phone has
been tested and meets the FCC RF exposure
guidelines when used with an accessory
designated for this product or when used with an
accessory that contains no metal and that
positions the handset a minimum of 1.0 cm from
the body.
Non-compliance with the above restrictions may
result in violation of RF exposure guidelines.