10
Special Note:
Using the brakes frequently, causing the motor to switch on and off
continuously, riding against the wind, riding uphill, riding in cold weather and
carrying heavy weight will influence the performance of the battery and reduce
the expected travel range.
MAINTENANCE
ATTENTION
Before carrying out any sort of maintenance, switch off the power and remove
the ignition key
Do some physical riding and safety check as you would do with a non
powered bicycle
Always clean your bike before wipe working on it.
Make sure the battery poles are clean as dirt can reduce the efficiency or
burn the poles.
Your Plugz bike should undergo at least an annual check-up
Adjust chain tension:
Your chain will lengthen over time, it should be adjusted as follows:
loosen the bolts on the rear shaft
if the chain is too loose, turn the chain bolt clockwise
if the chain is too tight, turn chain bolt counter-clockwise
keep the chain ring and rear wheel gear aligned
Adjusting the brakes:
Correct brake adjustment will easier brake control and offer greater safety:
The brakes are adjusted just as on regular bikes. Make sure to check that the
electric cut-off is working properly
Lubrications:
For long –life service the following parts on your Plugz bike should be regularly
lubricated:
Chain; front axle; rear axle; freewheel, front fork and other rotational parts
Electrical parts should not be lubricated as they are factory lubricated
