12
ABOVE:
Rear panel layout showing input and output terminals
PreAMPLIFer INPUTS
Connect your preamplifier to the input of the PLINIUS SA-103 using suitable single-
ended RCA or Balanced XLR interconnect cables only.
If using single-ended RCA inputs, connect your preamplifier to the RCA inputs on the
back of the PLINIUS SA-103. Make sure you connect the red coded cable to the red
RIGHT RCA input, and the black (or white) cable to the black LEFT RCA input. Also
make sure the RCA connectors are a snug fit and are inserted all the way in. For XLR
input connection, make sure you connect the RIGHT XLR input and LEFT XLR inputs
to the right and left outputs from your preamplifier respectively.
Use the Amplifier Configuration Selector switch to select RCA STEREO if you are using
unbalanced RCA inputs or to select XLR STEREO if you are using balanced XLR inputs.
Preamplifier Output
Interconnects
SA-103 Input
NOTE:
DO NOT connect XLR and RCA at the same time, use only one or the other.
Detailed instructions for using the SA-103 in RCA BRIDGED MONO, and XLR BALANCED
MONO modes are later in this section.
