Call
Call signals may be initiated by entities across CrewNet. Each 2-Wire intercom port may be individually set to send
and receive a CrewCom-generated call signal to or from a connected wired intercom system by enabling the Call
function for that port. Disabling the Call function for that port prevents the signal from leaving CrewCom via the
respective port.
l
Call
: An RP Function button option. When enabled for wireless devices, the user can elect to send a call signal
to the RPs of each conference whose Talk button is currently active on that individual RP, or the user can elect
to send a call signal to the RPs of a single assigned conference (regardless of the associated Talk button’s
status). When enabled for external hardwired intercom devices, a signal will be sent to any connected 2-wire
devices associated with a conference whose Talk button is currently active on that individual RP (as long as
outbound call is enabled for the CU port associated to the conference) or a signal will be sent to any connected
2-wire devices associated with that conference (as long as outbound call is enabled for the associated CU
port). Call can be enabled for both wireless and hardwired devices or limited to only one type.
l
Call on Talk
: An RP Talk button function. When enabled, a call signal will remain active while the Talk button
is active. This function is commonly used in applications where a two-way radio interface is connected.
See
.
Set Up Call
Each CU wired intercom port (2-Wire only) can be individually set to send and receive a CrewCom-generated call
signal to/from a connected wired intercom system. To do so, turn that port’s Call function
ON
. Turning the Call
function
OFF
only prevents the signal from entering or leaving CrewCom via the respective port. Call signals can still
be generated and transmitted by entities across CrewNet. See
"Intercom Settings Menu" on page 52
for more
information about this process.
In addition to enabling Call for the CU port(s), you will need to set up Call on the Radio Pack Profile. This is best done
via CrewWare; see the CrewWare Manual for the process details.
Operation - 75
Summary of Contents for Crewcom CCU-22
Page 1: ...Control Unit OPERATING MANUAL...
Page 2: ...ii...
