Chapter2 Setting Up the System
This scanning process only happens when (1) opening
Presto! WMS the first time (2) the adapter has been
modified.
Presto! WMS will recognize the previously connected
device when opening and skip the device scanning. If
the previously connected device has been removed, a
message will open and device scanning will be done
again.
For WLAN cards that have yet to pass the Windows
certification, the scanning process won’t find the
adapter. This message will appear to help you find a
solution: “WMS is unable to connect to the receiver with
the Windows Standard Utility. To begin using the
software, please use your Windows WLAN card utility to
manually locate a wireless connection to the receiver”.
After you click OK, the main control panel will open. If
you used the WLAN Card utility to manually locate a
wireless connection to the receiver, you can start to
play. Otherwise an adapter won't be found.”
For Ethernet, the scanning process won't start and the
main control panel will open.
3. The scanned adapters will be shown on the
Adapter List
. Click one
to select it.
5
