Plextor PX-650US, User Manual

Page: 2 / 528

2
The AC/DC adapter or plug is damaged. (a.)
Liquid has penetrated into the equipment. (b.)
The equipment has been exposed to moisture. (c.)
The equipment has not worked well or you can not get it to work according to the user’s (d.)
manual.
The equipment was dropped and damaged.
(e.)
The equipment has obvious signs of damage. (f.)
S
afety
N
otice
Please read these safety instructions carefully. 1.
Please keep this User’s Manual for your reference. 2.
Please disconnect the equipment from your AC outlet before cleaning. 3.
Do not use liquid or sprayed detergent for cleaning.
Use moist sheet or cloth for cleaning.
For pluggable equipment, the socket-outlet shall be installed near the equipment and shall
4.
be easily accessible.
Please keep this equipment away from humid areas.
5.
Install this equipment on a reliable surface. If the equipment is not on a reliable surface, it 6.
may drop and cause injury.
The openings on the enclosure are for air convection. Please protect the equipment from
7.
overheating. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source is appropriate when connecting the equipment
8.
to the power outlet.
Place the AC/DC adapter where people will not step or trip on it. Do not place objects over
9.
the AC/DC adapter.
All Cautions and Warnings on the equipment should be noted.
10.
Use only the designated AC/DC adapter (5V/2A) to avoid damage of the driver. 11.
If the equipment is not in use for several days, disconnect the equipment from the power 12.
outlets to avoid damage by transient power surges.
Never pour any liquids into the openings, this could cause fire or electrical shock.
13.
Never open the equipment. For safety reasons, the equipment should only be opened by 14.
qualified service personnel.
If one of the following situations arises, get the equipment checked by a qualified service
15.
personnel:
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED; STORAGE 16.
TEMPERATURE ABOVE 60ºC (140ºF), IT MAY DAMAGE THE EQUIPMENT. The sound pressure
level at the operators position according to IEC704-1:1982 is equal or less than 70dB(A).
CAUTION: CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS
17.
DEFEATED. AVOID EXPOSURE TO THE BEAM.
CLASS 1 LASER PRODUCT
18.
COMPLIES WITH 21 CFR 1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER 19.
NOTICE NO.50, DATED JUNE 24,2007