How to Change/Remove Disc from PlexWriter 4/12
Without Removing Tray/Caddy Unit from the Drive
1. Hit the eject button on front of drive. Tray/Caddy unit will pop out about 1".
2. GRASP bottom (tan colored) portion of the Tray/Caddy in the middle (notice
‘‘ridges’’ and the words ‘‘Disc Eject’’). PULL out entire bottom portion until
you feel it hesitate or ‘‘catch’’.
3. Continue to pull it out further until you see the top, clear portion of the
Tray/Caddy unit come out another 1".
4. Remove the disc and insert another.
5. PUSH the Tray/Caddy unit straight in by applying pressure in the middle of
the bottom portion, with either your thumb or top of forefinger.
NOTE:
The Tray/Caddy will ‘‘catch’’ slightly on the bottom ---- simply continue
pushing it forward until it is back in the drive.
Loading the Caddy into the Drive
1. Open the drive’s door.
2. Carefully insert the caddy in
the direction shown, with
the arrow mark facing the drive.
3. Push the caddy into the drive
until the caddy drops into place.
Hint:
You need use only one hand to
insert the caddy into the drive. This
is easily accomplished by placing
the front portion of the caddy on
top of the lip of the drive’s door. You can press down lightly to open
the drive’s door, then slide the caddy into the drive.
Arrow Mark
CHAPTER 10 ---- Using Discs, Caddies, and Tray/Caddy Adapter
5.75" x 8.25" PLEX WRITER MANUAL
Plextor manual,
Carla Williams
1/2/98
38
PX-R412CS OPERATION MANUAL
