PX-R412CSe External Drive----REAR PANEL
1 DIP Switches:
Use to select SCSI ID number, parity, termination, test, block
size, or Flash ROM. Leave these jumpers at their factory settings unless one or
more of the following situations pertain to you:
SCSI ID number:
If you are using more than one SCSI peripheral, you may
have to change your SCSI ID number. See page 17.
Termination:
Review Chapter 7 to determine if you need to turn your termina-
tor switch off.
Block size:
If you are working in a UNIX environment and want to boot from
your CD-R drive, see page 18.
2 Power Connector:
Connects to AC power supply.
3 Audio Output Connectors:
Outputs stereo analog signal. Use to connect to
soundboard or audio amplifier. Use Standard RCA jack connectors.
4 SCSI Interface Connector:
Connects to SCSI interface board using 50-pin
high-density connectors.
cross-ref. x 3
Cross ref.
2 Power Connector
4 SCSI Interface
Connector
3 Audio Output Connectors
1 DIP Switches
CHAPTER 5 ---- Drive Features
5.75" x 8.25" PLEX WRITER MANUAL
Plextor manual, Carla Williams
1/2/98
12
PX-R412CS OPERATION MANUAL
