Neurotechnology Research Systems
Stimulator 2.0
- 2 -
Stimulator 2.0
User’s Guide April 2011
CAUTION:
THIS STIMULATOR IS NOT FOR USE IN HUMANS
CAUTION:
READ THE ENTIRE MANUAL BEFORE ATTEMPTING TO OPERATE THIS EQUIPMENT
IMPORTANT:
OBSERVE THE FOLLOWING SEQUENCE DURING ALL EXPERIMENTS:
1.
TURN THE STIMULATOR POWER ON
2.
LAUNCH THE USER INTERFACE PROGRAM
3.
CONNECT THE STIMULATOR TO THE ELECTRODES
4.
CONDUCT THE EXPERIMENT
5.
CLOSE THE USER INTERFACE PROGRAM
6.
DISCONNECT THE STIMULATOR FROM THE ELECTRODES
7.
TURN THE STIMULATOR POWER OFF
Plexon Inc Proprietary
The information contained herein is the property of Plexon Inc. and it is proprietary and restricted
solely to assist Plexon Inc. customers.
Neither this document nor the contents may be disclosed, copied, revealed or used in whole or in
part for any other purpose without the prior written permission of Plexon Inc. This document must
be returned upon request of Plexon Inc.
The information contained in this document is subject to change without notice. Plexon Inc.
reserves the right to make changes in equipment design or components as progress in engineering
or manufacturing may warrant.
This user’s guide is PN 14-20-A-13
This user’s guide refers to:
Hardware
PN 14-20-A-10-A
Firmware
PN 14-20-A-07
Software
PN 14-20-A-08
Copyright © 1983-2011 Plexon Inc, All Rights Reserved
® Plexon is a registered trademark of Plexon Inc.
Printed in the United States of America
