Copyright © 2003-2006 Pleora Technologies Inc.
Page 10
Rev 070505
3.2
Power and IO Connectors
3.2.1
Power Connector for OEM Board Set
The iPORT PT1000-CL4 OEM board set accepts power supply voltages of from 4.5 V to
16 V (regulated). The connector, shown as J2 on the left-hand side of Figure 1, is a
Molex 4-pin 6373 Series (22-23-2041). The part mates with the Molex 4-pin shell (22-
01-3047) and the Molex crimp pin (08-55-0102). Table 4 lists the four pins in this
connector and describes the function of each.
Ethernet
J2
J12
Figure 1: Power and IO Connector Locations on the OEM Board Set
Pin
Signal Name
Type
Description
1
GND
PWR
Ground
2
VIN
PWR
Power supply voltage in (4.5 V to 16 V regulated)
3
VIN
PWR
Power supply voltage in (4.5 V to 16 V regulated)
4
GND
PWR
Ground
Table 4: Power Connector Pin-Out for the OEM Board Set
