CAR-SEAT FIXING WITH ISOFIX SYSTEM
After IsoFix hookings have come out, as shown in Fig. 4, lift the bag with inside
TOPTETHER fixing system (12) so to avoid that remains trapped between the seat and the
vehicle (Fig. 5).
With car-seat forward facing on seat (Fig. 6), fix car-seat hookings to car IsoFix hooks until
they're completely fixed (CLICK) (Fig. 6A).
WARNING: Make sure that car-seat and car's IsoFix systems are all completely locked and
the IsoFix fixing indicator (16) is green (Fig. 6B).
Pull and keep pulled IsoFix handle positioning (6) (Fig. 7A), push car-seat against the seat
(Fig. 7) until it is completely sticked.
Check that there is NO space between car-seat and seat (Fig. 8). Hook the snap (Fig. 9) to
the TOPTETHER fastening hook (Highlighted with its own logo in your car) according to the
vehicle's setup (Fig. 10). Pull belt strap (Fig. 11) to completely fix car-seat. Pull until the
green indicator is WELL visible on the buckle (Fig. 12).
Now your "FORMULA-FIX" car-seat is ready for use; to remove it, follow the above steps in
reverse order.
Before laying and ensure your child inside, read "adjustment" of car-seat described below.
WAY OF USE AND REGULATIONS
CORRECT BELTS POSITION
Pay special attention to belts position; make sure they are in the correct position and close
to the body. Belts should not be placed too high or too low than your child (Fig. 13).
To adjust seat belts (2) and headrest (1), pull the headrest height adjusts handle (11)
upwards (Fig. 14). Then adjust belts and headrest depending on the height of your baby;
FORMULA-FIX, in this configuration, is adjustable in three different positions. At each
headrest position corresponds a belt positioner (14) position, as shown in Fig. 15. To make
any adjustments, either up, both down, you have to pull up the headrest height adjusts
handle and then adjust the headrest to the desired position.
BELTS REGULATION AND FIXING
After you have PROPERLY fixed "FORMULA-FIX" car-seat on chosen seat, loosen belts by
pressing and holding belts release button (9) placed on the seat, hold both belts padded
shoulder straps and pull them both at the same time (Fig. 16).
