EE
DD
EE
AA
1
2
FF
BB
FF
DD
B
A
F
G
AA
BB
x 1
PREPARATION
ASSEMBLY INSTRUCTIONS
1. Insert handle (A) into hole in mesh cover (B).
Use wrench (FF) to secure M6 Flange nut
(DD) to the underside of the mesh cover.
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents above. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 15 minutes
Tools Required for Assembly: Phillips Screwdriver (Not Included) and Wrench (Included)
Hardware Used
M6 Flange Nut
2. Attach ash catcher (G) to fire bowl (F) using
M5 x 10mm bolt (AA) and M5 nut (BB). Tighten
with wrench (FF) and screwdriver.
M5 x 10mm Bolt
x 3
Wrench
M5 Nut
x 3
Wrench
x 1
Hardware Used
4