17
ASSEMBLY INSTRUCTIONS
Caution: Never place a table lid on the
fire pit when in use. Ensure the fire pit
has cooled before placing a table lid over
the fire pit.
13. Screw the knob (A) on the table lid (B) with one
M4X6 screw (EE) or one M4X10 screw (FF) and
one washer ø4 (GG). Tighten with phillips
screwdriver (II).
15. Use only 20-pound cylinders (approximately
18 ¼ inches high and 12 ¼ inches in diameter)
equipped with a cylinder connection device
compatible with the connection for the hose
regulator supplied with this appliance. Propane
gas and cylinder are sold separately.
A dented, rusted or damaged propane cylinder
may be hazardous and should be checked by your
cylinder supplier. Never use a propane cylinder
with a damaged valve connection.
15
Standard 20 lb. tank
Use a glove when handling glass rocks.
Do not sit or stand on this table.
Keep children away during assembly. This item contains small parts which can
be swallowed by children.
Do not use indoors and inside any enclosure.
Retain the assembly instruction for future reference.
Installer — Please leave these instructions with the owner.
14. Place the table lid (B) over the fire pit.
Total fire pit installation is complete.
14
10-2
13
GG
EE
B
A
Hardware Used
FF
GG
EE
Screw M4 X 10
Washer ø4
Screw M4 X 6
X 1
(OFG444T)
X 1
(OFG418TA, OFG900T, OFG901T)
X 1
ATTENTION:
THIS PRODUCT IS NOT FOR COMMERCIAL USE. INTENDED FOR
RESIDENTIAL USE ONLY.
II
Phillips screwdriver
