4
ASSEMBLY INSTRUCTIONS
Hardware Used
1. Attach the two front feet (B) to the front of the
screen (A) by inserting four M6x25mm bolts (AA)
through the pre-drilled holes in the feet (B) and
through the screen frame (A). Secure with four
M6 nuts (BB). Use a wrench (DD) to hold the bolt
(AA) in place while using the other wrench (DD) to
tighten the nut (BB). Repeat for all 4 bolts (AA)/
nuts (BB).
M6x25mm Bolt
x 4
AA
M6 Nut
x 4
BB
Hardware Used
2. Attach the back feet (C) to the back side of the
screen (A) by inserting one M6x15mm Bolt (CC)
into the hole in each foot (C) as illustrated in
figure 2. Adjust feet (C) to desired width. Tighten
against the screen (A) using the wrench (DD).
NOTE: The back feet are designed to adjust
to the inside width of your fireplace opening so
that, if desired, the screen can be placed flush
against the fireplace.
M6x15mm Bolt
x 2
CC
Wrench
DD
Wrench
DD
1
2
B
A
BB
AA
A
CC
C
