5.1.1. Press Tablet power key and check whether the PLDT TELPAD logo appears upon initialization.
5.1.2. If the Android™ Tablet doesn’t launch, connect the Tablet to the power supply through the dock.
5.1.3. If the problem still exists, please contact the PLDT Business office.
5.2.1. If there is an electronic device emitting radio frequencies near you, switch it off or put it away from the Tablet.
5.2.2. Remove any peripheral equipment such as DSL splitter or fax machine and connect your phone directly to the modular
box.
5.2.3. If the problem still exists, please contact the PLDT Business Office.
5.2 No Dial Tone
5.3.1. If there is an electronic device emitting radio frequencies near you, switch it off or put it away from the Tablet.
5.3.2. Remove any peripheral equipment such as DSL splitter or fax machine and connect your phone directly to the modular
box.
5.3.3. If the problem still exists, please contact the PLDT Business Office.
5.3 Distorted Audio on Speaker
5.4.1. Check if there is a dial tone. If there is none check your RJ11 connection and make sure it is properly connected.
5.4.2. Look at your screen and make sure that the Dialer is set to Line 1; otherwise, touch the Line 1 button. Make sure that the
screen shows the message “TELPAD is on the dock”.
5.4.3. If the problem still exists, please contact the PLDT Business Office.
5.4 Tablet Dialer cannot Make a Call
5.5.1. Check if the RJ9 cable is properly connected.
5.5.2. Unplug and re-plug the coiled cable to eliminate the possibility of a loose RJ9 connector.
5.5.3. Try a different telephone unit, if possible, to check if it’s a line problem.
5.5.4. If the problem still exists, please contact the PLDT Business Office.
5.5 No Audio Response in the Handset
5.1 Tablet not Powering up
84
5 BASIC TROUBLESHOOTING FOR THE TELPAD
Summary of Contents for MA7R
Page 1: ...TELPAD MA7R...
