Installation Instructions
Model XX0705
PA1361
Page 9 of 10
Fasteners
• Inspect for loose fasteners.
Tightening torque specifi cations are:
Bolts and Nuts: Snug tighten and tighten an additional
one-half turn.
• If during the maintenance process a bolt needs to be
removed from a part or parts, it will be necessary to apply
a drop of liquid thread lock / loctite to the bolt before
reinstallation.
• Inspect for missing, worn or broken fasteners. If any
missing, worn or broken fasteners are found, refer to the
installation instructions for proper replacement fastener.
If any damage is detected, barricade equipment to
prevent use until repair is completed. Contact your sales
representative immediately for a replacement part.
Castings
• Inspect the aluminum castings to insure they are properly
secured to the component.
• Visually inspect the castings for cracks or breakage. If
any damage is detected, barricade the equipment to
prevent use until repair is completed. Contact your sales
representative immediately for a replacement part.
Rope
• Inspect the rope for any fraying, wear or loose connectors.
Mats
• Inspect the mats for any tears or loose connectors.
Replacement Parts
• Refer to your installation instructions to obtain replacement
part number.
• Contact your sales representative or call Playworld
Systems’ Customer Service for a replacement part.
Equipment Maintenance
Playworld Systems
®
Model XX0705
PlayForm 7
Father To Mother Belts And Handle
1000 Buffalo Road • Lewisburg, PA 17837
www.playworldsystems.com
For Customer Service, Call
800-233-8404 or
570-522-9800
OUTSIDE U.S.