7
GB
Mounting and activating the
lamps (fig. J)
1. Remove the protective paper from each lamp
(27) and stick the lamps to the desired posi-
tion on the doll’s house.
2. Press the button (27d) on the lamp in order to
activate the light.
Note:
The light switches off automatically after
approx. 1 minute.
Changing the battery (fig. K)
WARNING! Follow these instructions in
order to avoid mechanical and electrical
damage.
There are batteries in the bell (25) and in the
lamps (27).
You can change the batteries if they stop work-
ing.
1. Carefully remove the bell or the lamp from the
doll’s house and release the relevant screw
(25a)/(27a) using a screwdriver.
2. Remove the cover (25b)/(27b).
3. Carefully remove the empty battery from
the battery compartment (25c)/(27c) and
exchange it for a new battery.
Note
: Pay attention to the plus and minus
poles on the batteries and that they are inserted
correctly.
The batteries must be located entirely inside the
battery compartment.
4. Tighten the screws on the covers of the bell
(25) or the lamp (27) and attach the bell or
lamp back on the doll’s house.
Storage, cleaning
Always store the product in clean and dry condi-
tion at room temperature.
Only wipe clean with a dry cleaning cloth.
IMPORTANT! Never clean the product with
aggressive cleaning agents.
Disposal
Dispose of the article and the packaging materi-
als in accordance with current local regulations.
Packaging materials such as foil bags are not
suitable to be given to children. Keep the packa-
ging materials out of the reach of children.
• Observe the polarity (+/-) when inserting
batteries.
• Change all batteries at the same time and
dispose of the old batteries properly.
• Warning! Batteries may not be charged or
reactivated in any way. They may not be
dismantled, thrown into fire, or short-circuited.
• Always keep batteries out of the reach of
children.
• Do not use rechargeable batteries!
• The cleaning and user-maintenance may not
be carried out by children without supervision.
• Clean the batteries and the device contacts as
necessary and before inserting the batteries.
• Do not expose the batteries to extreme
conditions (e.g. radiators or direct sunlight).
Otherwise there is an increased risk of leaks.
• Batteries can endanger life if swallowed. Keep
batteries out of the reach of small children for
this reason. Seek medical help immediately if
a battery is swallowed.
Danger!
• Handle a damaged or leaking battery with
extreme care and dispose of it properly and im-
mediately. Wear gloves to handle the battery.
• If you come into contact with battery acid then
wash the affected area with soap and water.
If battery acid gets in your eye rinse it out with
water and seek medical help immediately!
• Do not short-circuit the terminals.
Assembly
• In order to assemble the product please follow
the individual steps as shown in figures B - H.
• You will also need a screwdriver and a sec-
ond Allen key to assemble the product.
Note:
We recommend attaching the product to
a wall using suitable mounting materials.
Mounting and activating the
bell (fig. I)
1. Write on the nameplate (26) and glue the
nameplate to the bell (25).
2. Remove the protective paper from the back
of the bell and stick the bell to the desired
position on the doll’s house.
3. Press on the bell to activate the sound.
