14
Make sure the exit is level and making firm
contact with the ground.
Note: If the exit is not making contact with
the ground, it will be necessary to remove
earth under the lumber support until exit
firmly contacts the ground.
At locations shown screw Playset Anchors into
ground by hand (a long screwdriver will help).
Use the anchor mounting hole as a drill guide
and drill a
¹₄
" hole 1
¹₂
" deep into the boards.
Attach with
³₈
" x 2" lag screws and
³₈
" washers
provided.
Fill in around bottom of slide exit to make
surface level with surrounding grade.
Items for
STEP 17:
(2) Anchors
(2)
³₈
" x 2" lag screws
(2)
³₈
" washers
Note: If soil conditions permit anchors to be pulled out
easily, such as in sandy soil conditions, cementing
is required. Anchors must be placed below the
level of shock-absorbing material to prevent
tripping or injury resulting from a fall.
